The daily maintenance and checklist for key component inspections of the bag breaker machine can be summarized as follows:

1. Electric Hoist

- Check whether the electric hoist is operating normally, including its load - bearing capacity and the wear of the chain.

- Ensure that the electric hoist is well - lubricated to avoid equipment failures caused by insufficient lubrication.

2. Moving Bearings

- Check for signs of wear or damage on the moving bearings.

- Lubricate the moving bearings regularly to extend their service life.

3. Cutter Device

- Check whether the cutter device in the automatic bag - unpacking mode is sharp and free from damage or wear.

- Ensure the cleanliness of the cutter device to prevent impurities from affecting the cutting effect.

4. Transmission Components

- Check the wear of the motor belt, chain, and gears, and ensure that there is no slack or breakage.

- Add lubricating oil to the chain and gears regularly to maintain a good meshing state.

5. Electrical Components

- Check whether the power cord is loose or aging, and whether the fuse is intact.

- Ensure that all electrical connections are secure to avoid equipment shutdown due to electrical problems.

6. Filter Bags (if applicable)

- For bag breaker machines with bag - type dust collectors, regularly check whether the filter bags are damaged, have accumulated dust, or show rust spots.

- If a damaged filter bag is found, replace it promptly and record the replacement location and date.

7. Pneumatic Components

- Check whether the pneumatic components are leaking air or damaged, and replace the damaged parts in time.

8. Equipment Cleaning

- Regularly clean the surface and interior of the equipment to prevent dust and debris from entering the equipment and affecting its operating efficiency.

9. Lubrication Maintenance

- According to the lubrication schedule recommended by the manufacturer, regularly add lubricating oil to all moving parts, such as bearings and chains.

10. Fastener Inspection

- Regularly check whether all fasteners of the equipment are loose and tighten them in time.

11. Troubleshooting of Abnormal Situations

- If the equipment emits abnormal noises, vibrates, or gives an alarm, stop the machine immediately for inspection and troubleshooting.

12. Regular Maintenance Plan

- Follow the maintenance plan recommended by the manufacturer and carry out in - depth maintenance and overhaul according to the periodic requirements.

By following the above checklist, the bag breaker machine can maintain an efficient and stable working state in daily operation, while reducing the risk of production interruption caused by equipment failures.